-
- IEC60950-1 Clause 4.1 Stability 800N Drop Overturned Testing
Drop overturned testing equipment is mainly used to drop product in 800N force condition to test whether sample will be .....
- Model: AUTO-LDFD
- Updated on:2024-05-09
-
- IEC60068-2-32 Figure.A1.Rotating(or Tumbling) Barrel With 1m
It simulates repeated falls which may occur to such devices as connectors or small remote control units which are normal.....
- Model: AUTO-DGT
- Updated on:2024-05-09
-
- IEC 60950-1 Bump Test Apparatus
It is suitable for verify the drop resistance performance of audio, video and similar electronic apparatus having a mass.....
- Model: AUTO-KX003
- Updated on:2024-05-09
-
- IEC 60950-1 Clause 4.2.6 Drop Test Machine
It's suitable for verify the drop resistance performance of audio, video and similar electronic apparatus having a mass .....
- Model: AUTO-KX001
- Updated on:2024-05-10
-
- Drop Ball Impact Test Device
It is suitable for drop impact test for equipment enclosure,apply toPlastic, ceramic, glass, acrylic fiber and other mat.....
- Model: AUTO-BCV1
- Updated on:2024-05-10
-
- IEC61032/IEC60529 Standard 50mm Test Sphere Ball
Bearing steel impact all,with various kinds diameter and weight,option with hook or without hook ones.
- Model: AUTO-Q500
- Updated on:2024-05-10
-
- IEC 60950-1 Impact Ball Impact Strength Tester
It mainly used for mechanical strength testing equipment enclosure, test equipment enclosure should be able to ensure t.....
- Model: AUTO-BCH
- Updated on:2024-05-10
-
- Adhesive Force Impact Testing Machine
It's suitable for the adhesive force test of hot dip galvanizing coatings. During the test, the free dropping hammer is .....
- Model: AUTO-AFI
- Updated on:2024-05-10
-
- Enamels Pistol Impact Test Device
The lest apparatus consists of a striking bolt with a 5 mm steel ball tip which is shot once against the surface under t.....
- Model: AUTO-M90
- Updated on:2024-05-09
-
- Vertical Hammer Tester
The hammer consists basically of a striking element which falls freely from rest through a vertical height, selected fro.....
- Model:
- Updated on:2024-05-09
-
- Arrangement for Calibration of The Calibration Device
It is intended to verify the accuracy of the spring hammer calibration device.
- Model: AUTO-MCJ
- Updated on:2024-05-09
-
- IEC60068-2-75 Standard Figure B.1 Calibration Device
It is mainly used for the calibration of the spring hammer, it is primarily for third-party testing organization, the Na.....
- Model: AUTO-CJ
- Updated on:2024-05-09
HOTLINE:
+86-(0)755-26978980
