Introduction:
Test package is placed in the frozen food storage compartment and ice greenhouse performance test,
or in a freezer to test the freezing capability test, to simulate the load capacity of frozen food.
1. The freezing point of the test package is -1℃ (Its thermal performance is equivalent to lean beef)
2. Packaging material is a thin layer of plastic, or with appropriate materials which can do medium vapor
exchange with the environment, immediately seal the packaging material after filling,
3. When measured in ice greenhouse, must use the -5℃ test package.
4. You cannot use in test of testing freezing capacity and load temperature rise time.
5. M package means the 500g test package, it equipped with a thermocouple in the geometric center to
measure the temperature. The thermocouple contact the package directly.
International and Euro standard test package (ISO 15502) -1 ℃ and -5℃ two type .
Conform to Standards:
ISO 15502
Technical Specification:
Size(mm) | Weight(g) | Size Tolerance | Weight Tolerance |
25*50*100 | 125 | When the Side length size is 25~50mm, tolerance is allowed to be ± 2mm. 100~ 200mm, ±3mm. | ±2% |
50*50*100 | 250 | ±2% | |
25*100*100 | 250 | ±2% | |
25*100*200 | 500 | ±2% | |
50*100*100 | 500 | ±2% | |
50*100*200 | 1000 | ±2% |
Fill out the form