
IEC60695-10-2 Figure 1A Ball Pressure Test Apparatus
Description:Ball pressure test apparatus is used for testing parts of non-metallic materials for resistance to heat and apply to electro technical equipment, its subassemblies and components, and to solid electrical insulating materials except ceramics.
Model:AUTO-BPA
Manufacturer:Factory
Update time:2025-05-06
Visits:117
Introduction:
IEC60695-10-2 Figure 1A Ball Pressure Test Apparatus is the requirement ball (R2.5mm) and total test force
20N ± 0.2N ball pressure testing device,pressure level of the state and was placed in the heating chamber on the surface of the test.
In the test temperature specified by the after 60min +2 min/0min,the test quickly (<10s) immersed in 20 °C ± 5 °C water cooling 6min ± 2min,3min removed from the water surface within the indentation diameter measurement test, as the indentation is more than 2mm in diameter to evaluate the test specified in the heat deformation temperature.
Conform to standard:
IEC60695-10-2 Figure 1A ,IEC60884-1,IEC60320-1, IEC60335-1,IEC60598-1,IEC60950-1.
Technical Specification:
Model | AUTO-BPA |
Ball diameter | 5mm (R2.5mm) |
Total test pressure | 20N±0.2N |
Samples bearing | diameter50mm, length100mm Solid stainless steel cylinder |
Production of materials | all used Stainless steel materials |
Remark | Ball Pressure Instrument takes another a hot box (oven) supporting the use |
Fill out the form