IEC 60950-1 Hot Oil Flaming Tester
Description:The Hot Flaming Oil Tester is used to test the fire protection properties of ventilation openings in enclosure. Burning oil is poured through the ventilation grid to see if a piece of cheese cloth under the grid is ignited.
Model:AUTO-FZRY- Manufacturer:Factory
- Update time:2025-05-06
- Visits:121
Introduction:
It simulate electrical and electronic equipment flammable liquid used internally, it may burn since
overheat and leak from fire-proof equipment shell,leading to electrical fire.A small metal ladle (>10ml)
is partially filled with 10ml of distillate fuel oil that is a medium volatile distillate having a mass per unit volume between 0.845g/ml and 0.865g/ml,a flash point between 43.5℃and 93.5℃ and an average
calorific value of 38ml/l.
Conform to standard:
IEC60950-1:2005
Technical Specification:
1).Model:AUTO-FZRY
2).Flat bottom pan of stainless steel for hot oil
3).Set of bleached cheese cloth app. 40 g/m2
4).Steel frames (two) for holding the cloth material in level
5).Stands to hold the sample
6).Small ladle - long handle
Technical Specification:
| Model | AUTO-FZR |
| Control language | English,accept customized other language |
| Controller | PLC intelligent integrated control, touch interface operation |
| Flat bottom pan | Flat bottom pan of stainless steel for hot oil |
| Cheesecloth | Set of bleached cheese cloth app. 40 g/m2 |
| Steel Frame | Steel frames (two) for holding the cloth material in level |
| Sample fixture | Stands to hold the sample |
| Small ladle | Small ladle - long handle |
| Dimension | 110*74*125cm LWH |
| Power supply | 220V 50~60Hz 800w single phase accept customzied power supply |
Fill out the form
