IEC60695-2-20 Hot Wire Ignition Tester
Description:Hot Wire Ignition Test is strictly designed and manufactured according to IEC60695-2-20-2004,GB4943.1-2011 standard,it also can meet other relevant standard requirements.
Model:AUTO-RS- Manufacturer:Factory
- Update time:2025-05-06
- Visits:135
Introduction:
IEC60695-2-20Hot Wire Ignition Tester is strictly designed and manufactured according to IEC60695-2-20-2004, standard,it also can meet other relevant standard requirements.It simulates heating element or heat stress caused by a heat element and it appliance to fire hazard test of solid insulation material components of electrical and electronic products and other household appliances besides heat source(length below 13mm) and heat source(length below 13mm).
Conform to standard:
IEC60695-2-20:2004
Technical Specification:
| Model | AUTO-RS |
| Hot wire requirement | Diameter 0.50+0.02 mm Ni/Cr(80/20),Resistance：5.26Ω/m |
| Hot Wire Length | <400mm |
| Power Density | 0 - 0.31W/mm ±0.01W/mm |
| Maximum Current | 0 - 10A ± 0.5% |
| Reference Standard | IEC60695-2-20:2004 |
| chamber volume | ≥0.5m3 |
| Clamp Size | Sample Support Height:60mm Sample Bearing Clearance:70mm Sample support and electrode distance:35mm Sample:W*H*L 14mm*20mm*150mm Max |
| Winding Technical Parameter (selection) | Winding Distance:6.3mm Repeatability Accuracy:0.05mm Wire Configure Weight:5.4N Winding Method：Handle Sample:W*H*L 14mm*14mm*140mm Max |
| Language | English,accept customized other language |
| Power Supply | 220V/AC 50~60HZ 300W accept customzied power supply |
Fill out the form
