Introduction:
Thermal Shock Test Chamber is used to test the change of material under extremely high temperature and extremely
low temperature environment that continue alternation in the shortest time, Testing the
chemical changes or physical damage of material caused by the thermal expansion and
contraction.
Technical Specification:
GB2423.1-2008(IEC68-2-1)Environmental testing - Part 2: Test methods - Tests A: Cold;
GB2423.2-2008(IEC68-2-2)Environmental testing for electric and electronic products Testmethods - Tests B:Dry Heat;
GB/T2423.22-2008 Environmental testing for electric and electronic products-Part 2:Test
methods-Test N:Change of temperature;
GJ8150.3A-2009(MIL-STD-810D)environmental test methods and engineering guidelines;
GJ8150.4A-2009(MIL-STD-810D)environmental test methods and engineering guidelines;
GJB/150.5-2009 Temperature Shock Test.
Technical Specification:
Model | AUTO-EST50 | AUTO-ES80 | AUTO-ES150 | AUTO-ES225 | AUTO-ES408 |
Inner size (W*H*D) | 40x35x30cm | 50x40x40cm | 60x50x50cm | 70x60x60cm | 80x75x75cm |
External size (W*H*D) | 140x180x145cm | 148X190X155cm | 160x200X175cm | 175x210X187cm | 190x220x200cm |
Temp range | (150℃~A:-45℃; B:-55℃; C:-65℃); ( High temperature zone:+60℃~+150℃; Low temperature zone :-10℃~-65℃.) | ||||
Heating up time | RT~200℃ about 35min | ||||
Cooling down time | RT~-70℃ about 85min | ||||
Temp recover time | less than 5min | ||||
Temp Change time | less than 10sec | ||||
Temp control accuracy | ±0.5℃ | ||||
Distribution accuracy | ±2.0℃ | ||||
Inner materials | SUS 304# stainless steel plate for inner chamber,and stainless steel plate+ spray painting for external chamber. | ||||
Insulation materials | High-temperature high-density amino acid ethyl ester foam insulator material. | ||||
Power | AC380V 50~60Hz | ||||
Weight(about) | 700Kg | 900Kg | 1200Kg | 1400Kg | 1900Kg |
Fill out the form