Introduction:
It is intended to verify the accuracy of the spring hammer calibration device.
Conform to standard:
IEC 60068-2-63 Annex A, IEC 60068-2-75 Annex B.EN 71-2, ISO 8124.2, ISO 6941.
Technical Parameter:
Model | AUTO-MCJ |
Accuracy | 0.01J |
Repeat accuracy | +/-0.01J |
Measurement range | 0~2J |
Impact element for calibration | 250g |
Reference point | 1J impact energy achieved with a height of fall of 408+/-1mm |
Fill out the form