Application:
IEC60068-2-75 Standard Figure B.1 Calibration Device is mainly used for the calibration of the spring hammer,which is based on IEC60068-2-75 standard design and manufacture, primarily for third-party testing organization, the National
immigration department and appliance-related research institutes.
Features:
It is based on all parts IEC60068-2-75 Appendix B requirements of normative documents
tolerance manufacturing, most of the critical parts using special materials and special processing,
accuracy and stability in the superior performance.
Single-weight design,and supports the vast majority of domestic & foreign manufacturers
of all calibration hammer spring,for the company to meet the German PTL 2J spring hammer
calibration need extra special guide groove.
Conform to standard:
IEC60068-2-75 Standard Figure B.1 Calibration Device
Technical Parameter:
Main parameters | AUTO-CJ | Similar products |
The actual accuracy | 0.01J | 0.02J |
Repeat accuracy | ±0.01J | 0.02-0.04J |
Maximum range | 0-2J | 0.1-2J |
Guide groove diameter | 51mm | 51mm |
Pendulum energy loss | <0.002j | <0.008j |
Trigger Route | >30mm | <18mm |
Weight | 1pcs | 2pcs |
Fill out the form