Introduction:
Electric Iron Drop Tester is used to determine the mechanical strength of electric irons by repeated drop onto a steel plate according to IEC60335-2-3 clause 21.101.
The electric iron is operated under normal operation at rated power input and, except for cordless irons, the soleplate temperature is maintained under these conditions throughout the test.
Conform to standard:
IEC60335-2-3 clause 21.101
Technical Specification:
Model | AUTO-TEID |
Power Supply | 220V/AC 50Hz(customized) |
Load Power | 220V AC 15A |
Test Cycle | 1-9999 |
Work Speed | 20 cycles per minutes |
Drop Height | 40mm(could customized according to requirements) |
Support steel plate | 15mm thickness around 15KG |
Fill out the form