Product details
Textile over 45 ° Flammability Tester
Introduction:
The textile over 45 degree flammability tester is mainly designed and manufactured according to the GB/T14645 ,ASTM D1230 standard, which can meet the requirements of relevant standards. The A method is mainly used to measure the damaged area and length of textiles at 45 degrees, while the B method is used for contact testing of textiles when they are melted to a specified length under heat at 45 degrees.
Conform to standard:
GB/T14644，ASTM D1230
Technical Specification:
| Continuation timer | 0~999.9 s | resolution 0.1s |
| Flame retardant timing | 0~999.9s | resolution 0.1s |
| Ignition time | Method A: Thin fabric 30s, thick fabric 120s manual | / |
| Burner diameter | Method A: Thin fabric with a diameter of 6.4mm, thick fabric with a diameter of 20mm | Method B: Φ 6.4mm |
| Sample fixture size | Method A: Appearance -940 × 230mm, Inner Frame -250 × 150mm | Method B: Spiral diameter of 10mm, pitch of 2mm, total length of 150mm |
| Distance from the top of the igniter to the sample | Method A: Thin fabric 45mm, thick fabric 65mm | Method B：45mm |
Consulting
Fill out the form
