Introduction:
Heating Elements &Internal Wiring Flexing Tester is a specialized testing equipment for internal wiring of heating elements within flexible components,it meets the requirements of "Special Requirements for Electric Blankets and Other Flexible Heating Appliances" Clause 21.111.1 & Figure 111, IEC 60335-2-17.It adopting intelligent instrument counting and adjustable motor control. Can intuitively reflect the experimental conditions. It has the characteristics of high accuracy, good reliability, and easy maintenance.
Conform to standard:
Electric Blankets and Other Flexible Heating Appliances" Clause 21.111.1 & Figure 111, IEC 60335-2-17
Technical Specification:
Model | AUTO-PT111 |
Work station | One station |
Flexing speed | 0.33m/s |
Move back and forth range | 1m |
Test Times | 0~9999 times,can preset |
Trolley Pulley | Two pulleys with top R4 radius grooves groove bottom diameter Φ25mm |
Loading mass | 0.25kg ×2, 0.1kg × multiple (to straighten the wire) |
Loading current | not exceeding 50mA |
Sample length | 4m |
Wire Breakage Alarm | Automatically stops and alarms when no current is detected during testing |
Dimension | 2000mm×500mm×950mm LWH，250kg |
Power | 220V 50HZ 1000W single phase |
Fill out the form
