Introduction:
Three Vertical Bar Signal Generator (AUTO-RDL) Three vertical bar signal shall be used as defined inIEC62368 edition 3 3.2.1 .3 Three vertical bar signal The three vertical bar signal produces three equidistant vertical white bars on a blac
The three vertical bar signal produces three equidistant vertical white bars on a black background.
The width of each bar is 1 /6 times the nominal horizontal width ( W ) of the picture.
A line-time waveform of the signal is shown in figure 9. This signal has an APL of 50 % and includes
the reference white level. It is suitable for setting the output signal level and the luminance level of
white For the SECAM measurements, the subcarrier with the frequency and amplitude corresponding
to black and white is superimposed on the signal.
Conform to standard:
IEC62368 edition 3 3.2.1 .3 Three vertical bar signal.
The same bar width can be applied for the wide aspect ratio picture.
Fill out the form