Introduction:
Glow Wire loop is a wire loop that is defined at a temperature and is pressed against a stan­dardized test platelet made of plastic(or other materials) for a prescribed period of time
under precise test condi­tions. The test examines whether the test specimen ignites, whether
the flames propagate and whether burning material drips.
Conform to standard:
IEC60695-2-10 Figure 1
Technical Specification:
Model | AUTO-U |
Material | Nickel/Chromium |
Diameter of wire | Ø 4mm±0.04mmNi/Cr(80/20), standard |
Width between terminals | 36mm |
Hole Diameter | 0.5mm/1.0mm |
Fill out the form