Product details
Introduction:
This plug and socket test gauge is mainly used to test and inspect whether the structure and
size of plugs and sockets conform to VDE0620-1:2010-02 standards. And the mainly application
industries is electronics, electrical appliances, plugs and sockets and other similar areas.
Reference Standard: DIN VDE 0620-1-2010
DIN VDE 0620-1:2010 Gauge List
| NO. | Standard figure NO. | Specification | QTY. |
| 1 | DIN-VDE0620-1-Lehre1 | Socket jack R size gauge (5.0, 5.8, 6.0) | 3PCS |
| 2 | DIN-VDE0620-1-Lehre2 | Minimum opening width and minimum withdrawal force of contact socket | 2PCS |
| 3 | DIN-VDE0620-1-Lehre3 | Insertion force of bipolar plug | 1PCS |
| 4 | DIN-VDE0620-1-Lehre4 | Insertion force of double board plug with side grounding contact | 1PCS |
| 5 | DIN-VDE0620-1-Lehre5 | A gauge used to test the interval of the first contact closure | 1SET/4PCS |
| 6 | DIN-VDE0620-1-Lehre6 | Diameter of the pin | 1SET/4PCS |
| 7 | DIN-VDE0620-1-Lehre7 | Pin distance | 1SET/2PCS |
| 8 | DIN-VDE0620-1-Lehre8 | Maximum opening width of contact socket | 1PCS |
| 9 | DIN-VDE0620-1-Lehre9 | Test plug interchangeability gauge | 1PCS |
| 10 | DIN-VDE0620-1-Lehre10 | Impossible A of Single pole contact hole contact | 1PCS |
| 11 | DIN-VDE0620-1-Lehre10 | Impossible B of Single pole contact hole contact | 1PCS |
| 12 | DIN-VDE0620-1-Lehre11 | Non-pluggability of bipolar plugs without grounding contacts | 1PCS |
| 13 | DIN-VDE0620-1-Lehre12 | Impossibility of single-pole plug insertion (including 250g and 1000g weights) | 1SET |
| 14 | DIN-VDE0620-1-Lehre13 | Probe to check the inaccessibility of live parts in the protection door after the normal operation test | 1SET |
| 15 | DIN-VDE0620-1-Lehre14 | Test for grounding on both sides | 1PCS |
| 16 | DIN-VDE0620-1-Lehre15 | Probes used to check the inaccessibility of live parts in the protection door and the live parts of the enhanced protection socket | 1SET |
| 17 | DIN-VDE0620-1-Lehre16a | Maximum withdrawal force of plug (16a) | 1PCS |
| 18 | DIN-VDE0620-1-Lehre16b | Maximum withdrawal force of plug (16b) | 1PCS |
| 19 | DIN-VDE0620-1-Lehre16c | Maximum withdrawal force of plug (16c) | 1PCS |
| 20 | DIN-VDE0620-1-Lehre16d | Maximum withdrawal force of plug (16d) | 1PCS |
| 21 | DIN-VDE0620-1-Leher16e | Gauge (including 18N weight) | 1PCS |
| 22 | DIN-VDE0620-1-Leher17 | Lehre17gauge | 1PCS |
| 23 | DIN-VDE0620-1-Lehre18 | Lehre18 gauge | 1PCS |
| 24 | DIN-VDE0620-1-Leher19a | Force measuring gauge for 16A socket protection door | 1PCS |
| 25 | DIN-VDE0620-1-Leher19b | Force measurement gauge for 2.5A socket protection door | 1PCS |
| 26 | DIN-VDE0620-1-Bild14 | Bild14 gauge | 1PCS |
| 27 | DIN-VDE0620-1-Bild43 | Bild43 gauge | 1PCS |
| 28 | DIN-VDE0620-1, EN50075-Fig2 | Gauge for testing plug interchangeabilit | 1PCS |
| 29 | DIN-VDE0620-1-Bild16a | 16A temperature rise plug gauge 2P+E | 1PCS |
| 30 | DIN-VDE0620-1-Bild16b | 16A temperature rise plug gauge 2P+N+E | 1PCS |
| 31 | DIN-VDE0620-1-Bild16a | 25A temperature rise plug gauge 3P+N+E | 1PCS |
| 32 | DIN-VDE0620-1-Bild16d | 2.5A temperature rise plug gauge 2P+E | 1PCS |
Consulting
Fill out the form
