Introduction:
IEC60335-2-25 Clause 18 Microwave Oven Door Endurance Tester is used to check the door system, including the hinges, microwave seals
and other associated parts, shall be constructed to withstand wear that may be expected in normal use. The door is opened and closed as in normal use. It is opened from the closed position to an angle between 135 ° and 180° or the maximum possible angle, if this
is less. The rate of operation is six cycles per minute.
Conform to standard:
IEC60335-2-25 Clause 18
Technical Specification:
Model | AUTO-EMOD |
Angle | Most 140° |
Test Cycle | 10000 |
Sample Forms | Horizontal or vertical |
Direction of Rotation | Left or right |
Conform to Standard | IEC60335-2-25 clause 18 |
Controller | PLC intelligent integrated control, touch interface operation |
Control language | English,accept customized other language |
Power supply | 800VA 220V 48~60Hz 800VA single phase accept customzied power supply |
Fill out the form