Introduction:
1KW Vertical Flammability Tester is strictly designed and manufactured according to the relevant standard requirements of IEC60332-1-1 and IEC60332-1-2.The flammability tester is composed by the test part and control part, using the integrated design to facilitate the installation at the screen and debug.
The shell of the test chamber and the important components are all manufactured by stainless steel, resistant cigarettes and gas corrosion; The automatic degree of control system is high, has automatic ignition function, temperature and time figures show, so that the observation and records are facilitate and the use of it is stable and reliable.
Conform to standard：
IEC60695-11-2 Figure A
Technical Specification:
| Model | AUTO-DSP |
| Flame standard | IEC60695-11-2,1kw nominal pre-mixed flame |
| Burner Tube | IEC60695-11-2 Figure A |
| Burning Angle | 45° |
| Thermocouple | Type K (Ni/Cr - Ni/Al),200°~1050°C |
| Thermocouple Size O/D | 0.5mm |
| Temperature Resolution | 1ºC |
| Standard Copper Block | weight 10 ± 0 .05 g before drilling. Cu-ETP |
| Gas Supply | Propane,min.95% purity |
| Inner Dimensions | W*D*H=300mm*450mm*1200mm |
| Language | English,accept customized other language |
| Power | 220 V 50 Hz 3A or 115 V 60HZ Optiona accept customzied power supplyl |
Reference Standards: IEC60332-1-1,IEC60332-1-2,IEC60695-11-2.
Fill out the form
