IEC60335-1 Clause 23.3 Power Cord Flexibility Tester
Description: to check the protection of the supply cord where it enters the small household appliances (such as Coffee pot / electric iron) and lamps is adequately protected against excessive flexing where it enters the appliance.
Model:AUTO-C20A- Manufacturer:Factory
- Update time:2025-05-19
- Visits:131
Product details
Introduction:
Power Cord Flexibility Tester is used to check the protection of the supply cord where it enters
the small household appliances (such as Coffee pot / electric iron) and lamps is adequately
protected against excessive flexing where it enters the appliance.
Conform to standard:
IEC60335-1 Clause 23.3 & 25.14 Household and similar electrical appliances-Safety-Part,
IEC 60745-1, UL1082, UL1005, UL16471: General requirements, IEC60335-2-14
Technical Specification:
| Model | AUTO-C20 | AUTO-C20A | AUTO-C20B |
| Power supply | 220V 50Hz | 220V 50Hz | 220V 50Hz |
| Work station | one | one | Three or six |
| Test Flex Angle | 45°、60°、90°, | 0-360°; | 0-360° |
| Flex speed | 0-60cycles/min | 0-60cycles/min | 0-60cycles/min |
| Control | Electrical | PLC | PLC |
| Test Load | 5N,10N | 5N,10N | 5N,10N |
| Test Cycle | 0-999999 | 0-999999 | 0-999999 |
Consulting
Fill out the form
