Introduction:
UL746A/IEC60695-11-5 Needle Flame Test Apparatus is used for lighting, low voltage electric appliance, household appliances, electric machine, motor, electric tools, electronic instrument, electrical instrument, electrical connector such as electrical and electronic equipment and parts, components of research, production and quality inspection department,also suitable for insulation materials, engineering plastics.
Conform to standard:
IEC60695-11-5,UL746A,GB/T5169.10-2006
Technical Specification:
Model | AUTO-ZYA |
Needle burner | inner hole diameter Φ 0.5mm ± 0.1mm, Diameter, 9mm≤Φ, length ≥ 35mm, stainless steel |
Burner angle | 0,°20°, 45° (adjust flame height) |
Thermocouple | Ø0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand temperature 1100°C |
Burning time | 0-999.9 s ± 0.1 s adjustable (usually selected for 30s) |
Hold Burning time | 0-999.9 s ± 0.1 s, automatic recording, manual timeout |
Flame Height | 12mm ± 1mm (with height measurement instruments) |
Flame Gas | Propane gas/Butane gas, min. 95% purity (can use bottled lighter gases) |
Temperature Test Range | 0~1000°C |
Flame Temp Requirements | from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds |
Copper Block | 4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP |
Test process | automatic control, independent convulsions |
Chamber | ≥0.5m3 |
Dimension | 110*74*125cm LWH |
Control | PLC intelligent integrated control, touch interface operation |
Consult standard | IEC60695-2-10:2000,UL746A |
Power Supply | 800VA ,220V, 48-60Hz accept customzied power supply |
Display panel language | English accept customized other language |
Fill out the form