Socket outlet torque balance tester is a device provided with pins intended to be introduced
into fixed socket-outlets shall not impose undue strain on these socket-outlets.The balancing
arm of the test apparatus pivots about a horizontal axis through the centre lines of the contact
tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket-outlet.
With the machine not in engagement, the balancing arm is in equilibrium, the engagement
face of the socket-outlet being in the vertical position.After the device has been engaged,
the torque to be applied to the socket-outlet to maintain its engagement face in the vertical
plane is determined by the position of a weight on the balancing arm.
| Model | AUTO-LJ |
| Torque | not exceed 0,25 Nm |
| Load | 0.5N*2/1.25N*1/0.25N*1 |
| Plug | UL plug*1, Australia plug*1,all-purpose plug |
Standards: IEC60884 VDE0620 IEC6598 BS1363.3 IEC60065 figure 11.
Fill out the form
