Surface Temperature Probe Operation Manual
2016-06-15
[36]
Surface Temperature Probe Operation Manual
1.Introduction：
This test probe for measurement of surface temperature is designed and manufactured according
to IEC60035-2-6 Figure 104 standard and similar other international standards.This probe is mainly
used for test and inspection the temperature rise accessible ability of front and side electric stove and
oven.The probe for measurement of surface temperature has a 4N thrust in accordance with the
standards requirements.
2.Technical Parameter:
1.Introduction：
This test probe for measurement of surface temperature is designed and manufactured according
to IEC60035-2-6 Figure 104 standard and similar other international standards.This probe is mainly
used for test and inspection the temperature rise accessible ability of front and side electric stove and
oven.The probe for measurement of surface temperature has a 4N thrust in accordance with the
standards requirements.
2.Technical Parameter:
| Model | AUTO-TMT |
| Copper sheet | Brass with 5mm diameter and 0.5mm thickness |
| Thermocouple | American OMEGA,k type thermocouple with 0.3mm diameter |
| Insulation pipe | Polycarbonate with 3mm inner diameter and with 5mm outer diameter |
| Handle | POM with 4N thrust |
| REference Reference | IEC60035-2-6 Figure 104 |
3.Operation Manual :
1). This test should be taken after the black test corner test;
2). Please use the test probe for measuring after electrifying running 60min or reaching a steady statement;
3).Press the head of the probe on the tested device surface and thrust 4N force,then read the digital until the temperature stability.
1). This test should be taken after the black test corner test;
2). Please use the test probe for measuring after electrifying running 60min or reaching a steady statement;
3).Press the head of the probe on the tested device surface and thrust 4N force,then read the digital until the temperature stability.
